Protecta III (PRGE - Standard)
by Chalmit Lighting
The Protecta III is a proven and reliable T8 fluorescent luminaire. The Protecta’s rugged, corrosion resistant construction (IP66/IP67) combined with an advanced high frequency ballast ensure minimum product maintenance is required. When access is required the Protecta III features an easy access clamp bar and automatic lamp de-energisation.
- Simple rugged construction.
- Advanced control gear gives 50/60Hz operation, high power correction factor and regulated lamp output that is 20% greater at -20°C than competitors.
- Resistant to voltage fluctuations.
- dc operation.
- Quick release mains terminals.
- DTS-01 deluge tested.
- Vibration tested to comply with Lloyds/DNV.
- End of life (EOL) protection to IEC 60079-7.
The Protecta III hazardous area Ex e fluorescent luminaire is designed for use in Zone 1 areas. Click the ‘request a quote’ button to speak to one of our Specialists about how the Protecta III range could work for you.
|
Type of protection
|
Ex e mb q (Increased safety Encapsulation Powder filling)
|
|
ATEX Classification
|
Group II Category 2 GD
|
|
Area Classification
|
Zone 1 and 21 areas to EN 60079-10-1 and EN 60079-10-2 with installation to EN 60079-14
|
|
Certificate
|
EC Type Examination Certificate Baseefa04ATEX0220
|
|
Coding
|
EX II 2 GD Ex e mb q IIC T4 Tamb 55°C
|
|
Enclosure
|
GRP body with polycarbonate cover and brass suspension points
|
|
Reflector/Geartray
|
White polyester painted zinc coated steel
|
|
Entry
|
4 x M20 cable entries, 2 at each end
|
|
Termination
|
Quick release mains terminals - 4 core 4mm² max. conductor with looping and 16A rating through wiring. (6mm² terminations available - /SC option)
|
|
Installation
|
Two M8 tapped brass inserts located on rear of body
|
|
Control Gear
|
High Frequency
|
|
Relamping
|
Quick release diffuser clamp and hinged cover
|
|
Lampholder
|
G13 (Bi-pin)
|
|
Burning Position
|
Universal
|
|
Ingress Protection
|
IP66/67 to EN 60529
|
|
Electrical Supply
|
220V - 254V 50/60Hz
|
|
Std. Cat No.
|
Wattage
|
Lamp
|
TClass
|
T°C (Dust)
|
Ambient °C
|
Weight
|
|
PRGE/218/BI
|
2x18W
|
T8
|
T4
|
85
|
-20 to +55
|
7.4kg
|
|
PRGE/236/BI
|
2x36W
|
T8
|
T4
|
85
|
-20 to +55
|
10.9kg
|
|
PRGE/218/MO
|
2x18W
|
T8
|
T4
|
85
|
-20 to +55
|
7.4kg
|
|
PRGE/236/MO
|
2x36W
|
T8
|
T4
|
85
|
-20 to +55
|
10.9kg
|
MO – Mono-pin (fa6 Cap) Lamps. Mono-pin Coding: Ex d e q.
Options – Suffix to catalogue No.
|
/120
|
Specific voltage (110/130)
|
|
/M25
|
M25 cable entries
|
|
/SC
|
Screwed connection terminal block (up to 6mm² conductors)
|
|
/SB
|
Stainless steel mounting bush
|
|
/3P
|
3 phase termination facility (Not available if looping required)
|
|
/LBE
|
Looping both ends
|
|
/EL
|
Extra live termination facility (to match emergency circuit)
|
|
/SE
|
Spigot entry
|