LANTIME/M300/GPS/PS-1/FT-1/PS-4x/FT-4x
http://www.meinberg.de/english/products/lantime-m300-gps.htm
NTP time server for 19" installation
with management CPU and internal time reference:
GPS satellite receiver/radio clock with TCXO Timebase
- Meinberg GPS antenna input, BNC female connector, isolated
2 x LAN interface 10/100 MBit, RJ45 connector
1 x Terminal RS232 interface, 9pin D-Sub male connector
for initial setup and configuration
1 x USB Service interface
1 x LC-Display (2 x 40 characters) and 8 push buttons
----------------------------------------------------------------------------------------------
Signal Outputs:
2 x RS232 interface, independent, 9pin D-Sub female connector,
with multi data formats timestrings.
1 x PPS, TTL into 50 ohm, pulse duration 200 msec,
active high, female BNC connector
1 x Standard Frequency 10 MHz, TTL into 50 ohm, female BNC connector
1 x Alarm Relay Output, change-over contact, 3pin DFK connector
4 x PPS, TTL into 50 ohm, pulse duration 200 msec, active high, female SMA
connector
4 x Standard Frequency 10 MHz, TTL into 50 ohm, female SMA connector
----------------------------------------------------------------------------------------------
Technical specifications:
Power supply: 100-240V AC (50/60Hz)
Power consumption: max. 30W
19" metal chassis, 1U/84HP (483mm wide x 43mm high x 285mm deep)
CE compliant
----------------------------------------------------------------------------------------------
Scope of supply:
The system will be delivered inclusive of GPS/Converter
outdoor antenna, mounting kit and 20m coax-cable (RG58).