Her er du nå: Adeptor   >   Industriell IT   >   Time Synchronization   >   NTP Time Servers   >   M400   >   Meinberg LANTIME M450/GPS
Meinberg LANTIME M450/GPS Inkl. GPS antenne og 20m RG58 kabel Meinberg LANTIME M450/GPS Inkl. GPS antenne og 20m RG58 kabel Meinberg LANTIME M450/GPS Inkl. GPS antenne og 20m RG58 kabel Meinberg LANTIME M450/GPS Inkl. GPS antenne og 20m RG58 kabel

Meinberg LANTIME M450/GPS

Inkl. GPS antenne og 20m RG58 kabel

Varunummer: M450/GPS
Alt. varenr: 00262157

NTP Time Server with Reference Clock for Industrial Applications
The LANTIME M450 Time Server offers an unparalleled flexibility and versatility and provides accurate time to your network in a compact and full-featured DIN railmount package for industrial applications such as power generation, transmission and distribution (substation automation), process control and industrial automation systems. The M450 includes an LC-Display and keypad and an extremely broad range of available options.

Ultra compact Form Factor
The ultra compact form factor enables this NTP system to become the ideal time and frequency source in installations where every millimeter counts. With up to 6 network ports, this NTP appliance offers highest port densitiy.

Simple System Configuration
As with most LANTIME M-Series models, a large LCD panel showing the state of the internal time signal receiver and the NTP subsystem is combined with three bicolor LEDs (green/red) that indicate the status of the three main components: Reference Time (e.g. GPS or GLONASS), Time Synchronization Service (NTP) and Network (Link status). A fourth red LED is labelled ALARM and can be configured to signal any event that is covered by the notification handling routines.

Oscillator Options
The LANTIME M450 GPS is equipped with a high precision oscillator "TCXO" (look at oscillator options for details). The oscillator determines the holdover characteristics (e.g. when a reference source signal like GPS is disturbed or jammed). For applications with higher stability/holdover requirements there are several oscillator options available (up to "OCXO HQ").

Modular System Architecture
Because of its modular system architecture it is possible to equip a LANTIME M450 time server with a number of different reference time sources. Optionally several additional frequency-, serial string- and pulse outputs are available as well as power supplies for additional input voltage ranges.

In addition to the standard electrical interfaces a lot of output signals can be delivered on optical ports, too.

 

Characteristics

Status IndicatorsFour bicolor LEDs indicating:
- Reference time status
- Time service status
- Network link status
- Alarm states
DisplayLC Display, 4 x 16 characters
Control ElementsEight push buttons to set up basic network parameters and to change receiver settings
Frequency Outputs10 MHz via female BNC connector, TTL into 50 Ohm
Accuracy depends on oscillator (standard: TCXO), look at oscillator list
Pulse OutputsPulse Per Second (PPS), TTL level, pulse width: 200 ms
Accuracy of Pulse OutputsDepends on oscillator option:
< ±100ns (TCXO, OCXO LQ)
< ±50ns (OCXO MQ, OCXO HQ, OCXO DHQ)
InterfaceSingle serial RS-232 interface (no serial interface in case of an internal time code receiver).
Serial Time String OutputCOM 0:
Baudrate: 300, 600, 1200, 2400, 4800, 9600, 19200 Baud
Data Format: 8E1, 8E2, 8N1, 8N2, 8O1, 7E1, 7E2, 7N2, 7O1, 7O2
Time Telegram: Meinberg Standard Time String , SAT, NMEA RMC, Uni Erlangen (NTP), COMPUTIME, Sysplex, Capture String, SPA, RACAL, Meinberg GPS, NMEA GGA, NMEA RMC GGA, NMEA ZDA, ION, 6021 or IRIG-J
Relay OutputsError Relay
  • Max. Switching Voltage:
    125 V DC / 140 V AC
  • Max. Switching Current:
    1 A
  • Max. Switching Power:
    30 W DC / 60 VA AC
  • Response Time:
    Approx. 2 ms
Alarm outputSynchronous state of the module, relay output (changeover contact)
Network Interface2 Network ports:
1 x 10/100/1000Base-T RJ45
1 x 1000Base-T SFP Slot

Up to 25,000 NTP requests/second

Universal Serial Bus (USB) Ports1x USB Port:
- install firmware upgrades
- backup and restore configuration files
- copy security keys
- lock/unlock front keys
Power Consumption30 W (typical)
Operating VoltageAC/DC power supply (standard)
Rated voltage range: UN = 100-240 V AC (50-60 Hz) / 100-240 V DC
Max. voltage range: Umax = 90-264 V AC (47-63 Hz) / 100-250 V DC

Low DC (option):
Rated voltage: UN = 48 V DC
Max. voltage range: Umax = 20-60 V DC
Supported Time String FormatsMeinberg Standard Timestring, Uni Erlangen Timestring, SYSPLEX Timer, NMEA, Computime, ABB-SPA, SAT, Arbiter
Form FactorFischer aluminium housing for DIN mounting rail
CPU
  • Intel® Atom™ Processor E Series (2 Cores, 1.33GHz, TDP 3W)
  • Main Memory: onboard 2 GB
  • Cache Memory: 1MB 2nd Level Cache
  • Flash Disk: 4 GB
Operating System of the SBCCustom LANTIME OS based on Linux 4.x LTS Kernel.
Network Protocols OSI Layer 4 (Transport Layer)TCP, UDP
Network Protocols OSI Layer 7 (Application Layer)Telnet, FTP, SSH (including SFTP, SCP), HTTP, HTTPS, syslog, SNMP
Internet Protocol (IP)IPv4, IPv6
Network Autoconfiguration SupportIPv4: Dynamic Host Configuration Protocol - DHCP (RFC 2131)
IPv6: Dynamic Host Configuration Protocol - DHCPv6 (RFC 3315) and Autoconfiguration Networking - AUTOCONF (RFC 2462)
Network Time Protocol (NTP)NTP v2 (RFC 1119), NTP v3 (RFC 1305), NTP v4 (RFC 5905)
SNTP v3 (RFC 1769), SNTP v4 (RFC 4330)
MD5 / SHA-1 Authentication and Autokey Key Management
Parallel Redundancy Protocol (PRP)PRP (IEC 62439-3)
Time Protocol (TIME)Time Protocol (RFC 868)
IEC 61850Synchronization of IEC 61850-compliant devices using SNTP
Hypertext Transfer Protocol Secure (HTTPS)HTTP(S) for web interface and REST API access
Secure Shell (SSH)SSH v1.3, SSH v1.5, SSH v2 (OpenSSH)
TelnetTelnet (RFC 854-RFC 861)
Simple Network Management Protocol (SNMP)SNMPv1 (RFC 1157), SNMPv2c (RFC 1901-1908), SNMP v3 (RFC 3411-3418)
Physical Dimensions105 x 189 x 146 mm (W x H x D)
Supported TemperatureOperational: 0 - 50 °C (32 - 122 °F)
Storage: -20 - 70 °C (-4 - 158 °F)
Supported HumidityMax. 85 % (non-condensing) at 40 °C
Contents of ShipmentIncluded in delivery is a Meinberg outdoor antenna incl. mounting kit, pre-assembled antenna cable (except TCR and RDT models).
Technical SupportMeinberg offers free lifetime technical support via telephone or e-mail.
WarrantyThree-year warranty
Firmware UpdatesFirmware is field-upgradeable, updates can be installed directly from the unit or via a remote network connection. Software updates are provided free of charge for the lifetime of your Meinberg product.
RoHS Status of ProductThis product is fully RoHS-compliant.
WEEE Status of ProductThis product is handled as a B2B (Business to Business) category product. To ensure that the product is disposed of in a WEEE-compliant fashion, it can be returned to the manufacturer. Any transportation expenses for returning this product (at end-of-life) must be covered by the end user, while Meinberg will bear the costs for the waste disposal itself.
Additional InformationAdditional information about the Meinberg LANTIME family of NTP time servers and other LANTIME models can be found on the LANTIME overview page .

 
Copyright © 2024 Adeptor AS - All rights reserved Affärssystem och webshop är levererat av Multicase™ Norge AS