KEY FEATURES

• Reliable LED floodlight gives low cost of ownership and maintenance
• Low power consumption due to highly efficient LED light source and lens system
• Certified for Zone 1 areas with gas explosion hazard
• Low profile design (<250 mm) allows direct mounting on helideck
• Offshore resistant, high quality coating on cast light alloy base
• Stainless steel mounting facilities to prevent corrosion problems, and integrated junction box
• Wide beam spread for optimum equal helideck illumination
• Easy aiming facility to meet requirement of computer simulation for helideck illumination

PERFORMANCE CHARACTERISTICS

• Highly efficient LED light source and lens system
• No glare
• Aiming facilities provided

STANDARDS/CERTIFICATION

• Complies with ICAO Annex 14, Volume ll; International standards and recommended practices: Aerodromes, July 2013, chapter 5, paragraph 5.3.9 – Helideck Floodlights
• Complies with Normam 27; Chapter 5; Section 0505d
• Complies with Norsok C-004; Section 18.3
• SIRA 17ATEX0005 X; ATEX II 2 G Ex db eb op is IIB T4 Gb
• EN 60079-0, EN 60079-1, EN 60079-7, EN 60079-28
• IECEx KIWA 17.0003X; Ex db eb op is IIB T4 Gb
• IEC 60079-0, IEC 60079-1, IEC 60079-7, IEC 60079-28
• ABNT NBR IEC 60079-0, ABNT NBR IEC 60079-1, ABNT NBR IEC 60079-7 and ABNT NBR IEC 60079-28 (optional)
• Inmetro NCC 18.0033X (optional)

ELECTRICAL CHARACTERISTICS

• Operating voltage: see table
• Power consumption: See table
• Connection details: max. 4 mm²; 2 x M25x1,5 cable gland entries
• Earth connection: internal max. 4 mm² and external M5

PHYSICAL CHARACTERISTICS

• Dimensions (L x W x H):
  250 x 480 x 215 mm
• Weight: max 20Kg
• Design degree of protection: IP66
• Operating temperature range:
  -50°C to +55°C

SYSTEM DESIGN, CONTROL AND MONITORING

• When used in a floodlight system the average horizontal illuminance of the floodlighting will meet the regulatory requirements of at least 10 lux, with a uniformity ratio (average to minimum) of not more than 8:1 measured on the surface of the TLOF.